2026 price guide
Pipe Relining Cost Australia – 2026 Price Guide
Pipe relining commonly costs around A$500–800 per metre, while many residential projects may fall roughly around A$3,000–10,000. Larger or technically complex jobs can cost more. These are general market-oriented estimates only, not fixed quotes.
| Item | Typical pricing orientation (AUD) |
|---|---|
| CCTV drain inspection | approximately A$200–550 |
| Short sectional repair | approximately A$2,000–4,000+ |
| Typical residential relining project | approximately A$3,000–10,000 |
| Large or complex residential project | A$10,000–15,000+ |
| Typical relining rate | approximately A$500–800 per metre |
Figures are indicative market orientation in Australian dollars and exclude anything unusual about your property. Only a specialist who has seen the CCTV footage can quote your job.
What drives the price
- Length of pipe lined — the single biggest factor, and why per-metre rates exist.
- Pipe diameter — larger bores need more liner and more resin.
- Access — a clear inspection opening near the street is cheap; a line reachable only from inside a garage or under a deck is not.
- Number of junctions — each branch covered by the liner has to be reinstated and checked.
- Cleaning and preparation — heavy root mass, scale or grease adds hours before lining starts.
- Pipe condition — partial collapse may require a spot excavation first.
- Depth and ground conditions — deeper lines complicate any access work required.
- Location — labour rates, travel and parking differ noticeably between capital cities and regional areas.
- Difficult access under slabs and driveways — no digging means no reinstatement cost, which is where relining often wins.
- The excavation alternative — compare against the full replacement cost including concrete, paving and landscaping restoration, not just the pipework.
How to compare quotes properly
Two quotes for "relining the sewer" can describe very different work. Ask each specialist to state the length being lined, the start and finish points in metres from the access, which junctions are reinstated, the lining system used, and whether post-installation CCTV is included. A cheaper quote covering four metres of a nine-metre defect isn't cheaper.
Is relining worth it against replacement?
It depends almost entirely on what's above the pipe. Under an open lawn, excavation is often straightforward and competitive. Under a driveway, garage slab or established garden, the reinstatement usually dominates the bill. The full comparison is on pipe relining vs replacement.
Before you spend anything
Get the pipe inspected. Everything above is guesswork without footage — see what recurring blockages usually mean, or read how pipe relining works and where sewer pipe relining differs.
Get a pipe relining quote
- 1Problem
- 2Inspection
- 3Contact
Your postcode helps us identify specialists servicing your area. We don't need your street address at this step.
Pipe relining cost FAQs
Why is pipe relining quoted per metre?+
Liner material, resin and installation time all scale with length, so per-metre pricing is the simplest way to compare quotes. Setup, cleaning and access costs are usually fixed regardless of length, which is why short jobs look expensive per metre.
Is a CCTV inspection charged separately?+
Usually yes, commonly around A$200–550. Some specialists credit the inspection fee against the repair if you proceed — worth asking before you book.
Does the quote include reinstating junctions?+
It should. If a liner passes a branch connection, that junction has to be reopened. Check the written scope names every junction affected.
Can anyone quote without inspecting the pipe?+
They can give a ballpark, but not a firm price. Length, diameter, access and pipe condition are only known after a camera run.
Ready to get pipe relining quotes?
Send the postcode and the problem and we'll work on matching your enquiry with a pipe relining specialist servicing your area. Only a specialist who has seen your pipe can quote it.